|
All required software tools for the Temperature Logger can be found on this page. It is recommended to save the files onto your harddrive first before running the executables.
(right click onto the apropriate link and select the menu item "save target to" or similar)
 |
Temperature Logger Firmware Updates
|
»BS1000
1.0.3.8
»BS1000 1.0.3.7
|
BS1000 LAN Receiver Firmware Updates
Updates for the Software running on the BS1000 LAN Receiver.
Update instructions:
- connect BS1000 to the pc via usb
- unzip the FW package to some directory
- make sure the temperatureserver and templeraturemessengerserver are stopped during flash.
- run flash.bat
- power off and on the BS1000 after flash
Data and settings in the BS1000 should retain during flash.
Changelog:
- Changelog
for v.1.0.3.8
|
 |
Linux utility |
»rf_usb_http.zip 0.2
|
Linux rf_usb_http utility
This utility runs on Linux. It reads incoming BS500 measurements and converts
them into http requests according to a rule file. See readme.txt in the package.
Changelog:
rf_usb_http 0.2 (2-21-2011)
- removed endless loop when an unknown measurement type arrives
rf_usb_http 0.1 (10-21-2010)
- Initial version
|
| 
Top