It is currently Thu Feb 27, 2020 6:28 pm
       


All times are UTC + 1 hour




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: BS-510 No Standalone mode
PostPosted: Mon Jan 02, 2017 9:25 pm 
Offline
New User

Joined: Mon Jan 02, 2017 8:42 pm
Posts: 1
Hello,
I purchased temp logger TL-510 (BS-510 and 2 TL-3TSN) from Conrad Electronic ČR (www.conrad.cz). The BS510 works perfectly well with temperature logger software while connected to the PC, all 2 temperature sensors are found and data are transferred. In standalone mode (more power supply adaptors were tested) the yellow LED is constantly lit. However, after re-connection to PC, no data from standalone mode are transferred. Checkflash_v4 gives following result:
Open RF_USB
Connect and reset flash...
Please wait 20 secs...
Send write...
Send read...
flash verification failed (0)
Press any key to exit.

Thanks for your help.
Regards
Jezowicz


Top
 Profile E-mail  
 
 Post subject: Re: BS-510 No Standalone mode
PostPosted: Wed Feb 01, 2017 2:16 pm 
Offline
Administrator

Joined: Mon Mar 28, 2005 12:17 pm
Posts: 673
Hello,

Please send it to AREX for Test


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group