BS1400 firmware

- unzip this package to some directory
- run flash.bat: On vista/windows7: run flash.bat with elevated privileges.
  (in the file manager, right click on the flash.bat file and select the "run as administrator" option)
- follow the instructions 
- connect BS1400 to the pc via usb before flashing
- power off and on the BS1400 after flashing

- Data in the BS1400 (settings and measurement data) should retain during flash.
- If flashing would fail (usually because the temperature logger services are still running), switch off and on the BS1400 and retry

 
version 1.0.5.19
Date 2017-2-13
- For convenience added recent device.xml as default

version 1.0.0.18
Date 2017-1-9
SMS rulecode 6 was not accepted.


version 1.0.0.17
Date 2016-9-27
Test for dataflash extended

version 1.0.0.15
Date 2016-4-8
- timeouts on gsm module are handled differently
- recent event log is accessible via usb directly
- standard sensor definitions updated

version 1.0.0.14
Date 2016-2-16
- measurements of combined sensors (RH, CO2) were placed in the same file on the SD card
- '$c' tag (day of week) can also be output to message

version 1.0.0.13
Date 2016 
- Average/min/max functions: functions with different lengths were mixed up
- $T tag added: a table with the latest measurements for all sensors is generated. can be used in timer triggered rules.
- standard sensor definitions updated

version 1.0.0.12
Date 2015-8-31
- gsm rssi indicator on gsm display screen added: 0 = lowest signal strength, 5 = highest.

version 1.0.0.11
Date 2015-7-8
- Password protection added. Settings on the BS1400 can be read/written when the correct password is used. 
  Use the bs1400ConfigTool v2.0.22 or higher to change the password, and access the password protected configuration. The default password is an empty string. 
  This means that other tools can access the configuration as long as the password hasn't changed.
  The password is cleared with the clear all function of the configuration tool.

  All configuration files need to be uploaded again for this update.



version 1.0.0.10
Date 2015-2-6
- DNS setting removed, embedded dns of gsm module can be used on current model
- some improvements on error-log dislay
- device starts on gsm status display

version 1.0.0.9
- Fix in reset gsm module in case of unsuccessful connections



version 1.0.0.8
- Initial version release